Connect Ai and Titan using CITP

1. Make sure both devices are connected to a switch
2. Start both Ai and the consoles
3. In ai, setup the project as required
4. Adjust the starting channel and universe for each layer by double clicking the layer preview and setting them in the layer adjustments window.
5. Ai icon > file > system settings
6. Select correct artnet and citp adaptor
7. Press 100 channel mode
8. Press button to enable CITP
9. In Titan, press Patch > Active Fixtures
10. Select the server and place it in the fixture grid-warp
11. Press Avo + Disk > DMX Settings
12. Add the ArtNet lines which contain the servers control universes.